Heat Transfer Presses

What do I need to get started?

So that you can start right away, we have put together different starter sets. These sets contain everything you need to get started right away. The small set consists of a Silhouette Cutter - Cameo 3 or Portrait 2 - and some foils, which are easy...

What is the best way to store the HappyPress 3, open or closed?

Hello, for safety reasons, we recommend leaving the press open when the heating plate has not completely cooled down. When the heating plate has cooled down, the press can also be left in a closed position. In this case, however, for safety reasons...

Locks the Happypress 4 during the printing process ??? What is the Automatic Open function for ???

Hello Marc, the Auto-open module, opens the press automatically after the set time has elapsed. The press does not lock completely and can be opened manually in case of emergency. The advantage is that you don't have to stand next to it until ...

Hi, can only fabric or other materials be processed with the press? Thanks and greetings

Hello Katrin, In principle, paper, wood and similar materials can also be printed with the press. It is important that the material tolerates the heat and is not too thick for the press. Greeting Anja

Where and how can I register my HappyPress for the warranty extension?

Hello, Sandra, You can find everything about our HappyPress here: https://thehappypress.co.uk/ Greeting Anja

On which surface should I place the press? Does it give off heat downwards? Specifically, I am concerned with my kitchen worktop or desk top, which are made of solid wood or veneer. Is a certain base recommended? (Thanks in advance!)

Hi, Krissi, The press does not get very warm downwards. However, the rubber feet could leave marks when moving the press or standing for a long time. Greeting Anja

Please, mind that only logged in users can submit questions